The whole outfit for today!

Background

This downloadable fitted hoodie pattern is available from Ottobre’s Etsy store. It has front kangaroo pockets finished at the opening with rib knit, a full length front zipper, a concealed hood drawstring, and fairly wide rib knit cuffs and front and back hem bands. It comes in sizes 34-52.

Recommended fabrics are knits with 30% stretch.

Materials

I have a gorgeous bamboo fleece from Nature’s Fabrics in my stash I want to use for this pattern, but since I wasn’t sure about the fit or construction I decided to use something less precious for my first version, a cotton/poly sweatshirt fleece from Fabric Mart. It has about 20% mechanical stretch. I would not go below that amount of stretch for this pattern.

For the rib knit I used a pretty beefy rib knit from Jumping June Textiles. It ended up being lighter and paler in color than I had hoped for, but the quality is excellent.

The zipper is a #5 YKK metal zipper from WAWAK. The hood grommets are #00 metal grommets, also from WAWAK. The twill tape used for the drawstring and to finish the seam attaching the hood to the rest of the hoodie is from Amazon.

Fit

I cut a size 44 for most of the hoodie. For the hem band I cut a size 48. The hip of the hoodie where it meets the hem band is around a size 46. The hem band has negative ease so you stretch it to fit the hem of the fleece. I also made the sweatshirt length size 48 so I wouldn’t have to shorten my zipper.

I found the fit was spot on, though a bit on the snug side due to the lower stretch and lack of Lycra in my fabric. The sleeve and hem length were perfect for me. I didn’t know how I’d feel about the wide cuffs (about 3.5” wide) or wide hem (around 4”) but I like them! When I’m working in the kitchen I can just flip up the cuffs instead of pushing them up, and the hem band gives a good fit around my hips.

Construction

Ottobre instructions assume you’re using one of those cover stitch machines that does the faux RTW flatlock stitch. I don’t have one so I serged the edges together and any topstitching was done on my regular sewing machine. The seams were mostly sewn on my serger.

Once again when it came time to sewing on the pockets I used the Design Plus fusible web tape from The Sewing Place. It makes it SO much easier to do any sort of topstitching for tabs, pockets, etc when working with knits.

I should also mention the PDF download layers the pattern pieces onto the paper (much like the pattern sheets do) and no seam allowances are included. I actually prefer this as it’s less sheets to tape together and it forces me to trace onto tracing paper rather than take a shortcut and put the paper pieces directly onto the fabric.