Toddler Sweatsuit

Second version:

First version:

Materials

For the first version I used a heathered powder blue cotton French terry from Fabric Mart for the main fabric, and a baby rib knit from Nature’s Fabrics for the ribbing.

I really disliked working with this French terry. It was stiff and bulky and tightly woven, and at some point during the project my Janome 1100D serger got knocked out of time and required a trip to the dealer. Fortunately I have an old Janome MyLock 204D serger my parents gave to me way back when I was still in college and just learning to sew. I hadn’t used it in years, but after giving it a thorough cleaning, a couple of squirts of WD-40 in some strategic areas, and then more cleaning and a good oiling it was up and running. Even though it’s more difficult to thread and more work getting the tension correct, it did a better job handling this fabric than the 1100D.

Despite my dislike for working with this fabric my son has no issues wearing it! I can tell it will wear like iron too. He’s still not walking yet and the drier fall air is making the skin on his knees more sensitive, so I like him to wear pants out of sturdy fabrics.

For my second version I used a much softer and flexible rayon/poly/lycra sweatshirt fleece from Fabric Mart for the main fabric. For the rib trim I used a cotton rib knit purchased years ago, likely from Fabric Mart. Since the stretch was greater along the selvage I cut it cross grain. I used the reverse side for the cat appliqué.

#4: Sweatshirt

This pattern is a simple crewneck sweatshirt pattern, with set-in sleeves and ribbing finishing off the cuffs and bottom band as well as the neckline. the pattern has placement markings for if you want to add a ribbon trim going down the sleeve.

I didn’t make any alterations. I was able to construct this entirely on the serger aside from cover stitching the neck band in place and securing the end of the ribbing once the right shoulder seam had been sewn. Ottobre has you usually attach bindings flat vs in the round and I much prefer it this way. I can adjust on the fly vs trying to guess how long the binding strip should be before attaching it. Once you sew the other shoulder seam you tack the binding/seam allowance in place with a small straight stitch.

After attaching the neckline ribbing to the gray version I felt like it would be nice to do something extra, so I decided to do my first ever appliqué. I chose a cat because my son likes cats and the design was simple. I first copied the cat from Kwik Sew’s Sewing for Baby book. I then cut out the piece of paper, traced it onto a scrap piece of fabric interfaced with Pro-Sheer Elegance with a Frixon marker, then traced the outline of the pattern again onto Sulky Solvy. I didn’t have any fusible web so I attached it to the fabric with a glue stick. Then I put another piece of Solvy on top of the one I glued in place to prevent it from sticking to my presser foot. I used some Magnifico thread from Superior Threads I had in my stash for the outline. For most of the appliqué I used a 4mm wide and 0.75 length zigzag stitch. For the smaller details, like the tip of ear, eyes, and mouth I changed to a 1.5mm width. The nose was tricky, I ended up starting with a 4mm width stitch and kept decreasing as I went further down towards the mouth. The workmanship isn’t as fine as I would have liked and I should have used a dark gray or black for the eyes and mouth, but I do think it helps add more visual appeal without requiring an embroidery machine.

#5: Sweatpants

The sweatpants pattern has a two panel back with a horizontal seam and a drawstring at the elastic waist. There’s no crotch seam, instead all the shaping is done using that back horizontal seam. The back horizontal seam and the side seams are topstitched with a double sided cover stitch.

I chose to omit the drawstring because it was more materials to procure with little benefit, IMO.

For fit I did my usual alteration of adding 3/8” height at the center back. I find it makes pants fit better when he’s wearing cloth diapers.

For my first version I topstitched the center back seam with an ordinary straight stitch close to the edge. For my second version I skipped on topstitching the horizontal back seam entirely. I own the Janome Coverpro 2000CPX, which just does normal two and three thread cover stitches, not the double-sided cover stitch Ottobre recommends. I tried experimenting with the honeycomb stitch on my Janome 6500P and wasn’t impressed with the look, so I chose to just press it in place. It seems fine this way. Same for the side seams.

After making the Green Bean Baby pants and now these, I much prefer the Ottobre version. The back horizontal seam gives a lot of shaping over the butt area and the fact that the elastic is sewn in directly to the pants then folded over and topstitched instead of being inserted into a casing makes it much more secure (no rolling!) and easier to construct. The back seam also makes it more husband-friendly, as he struggles knowing the back from the front in home sewn clothes. The Green Bean Baby required more effort to fit and even so I feel like it still doesn’t fit as well as the Ottobre one does. The Green Bean Baby pattern seems short in the torso, long in the legs, and, if you’re making the full length pajamas, also seemed to run large in the neck. It often falls down over my son’s shoulder when he’s crawling around on the rug. Meanwhile the Ottobre patterns seemed to fit more consistently all over. I know Ottobre has a clothing industry background and even designed their own children’s collection at one point, so maybe that’s part of why the drafting seems to be better quality than the Green Bean Baby.

Ottobre 4/2023 #6: Infant/Toddler Coat

Background

Ottobre 4/2023 #6 is a children’s winter coat pattern for European sizes 62-98 (basically infants through toddlers). It features rounded patch pockets, a hood with darts at the back and elastic at the middle front for additional shaping, and extra long raglan sleeves meant to be cuffed. This jacket is fully lined.

I made a size 80 for my son. I think he’s about 31″ long and 22-23 pounds so at this point (just a guess, he’s really hard to measure now).

Materials

The pattern calls for ready-quilted fabric and fleece lining. I chose instead to use a wide wale deep navy medium weight corduroy from Gorgeous Fabrics.

For the lining I used a soft, sturdy cotton flannel from Fabric Mart (which was left over from my husband’s pajama pants).

Since this is meant to be a winter jacket I wanted more warmth, so I used 3M Thinsulate C150 from Vogue Fabrics for the interlining. I actually bought the Thinsulate a dozen years ago…just getting around to using it!

Instead of velcro for the hood and snaps for the front I chose to use wood buttons. It seemed to fit in more with the rustic corduroy and flannel fabrics.

Construction

The pockets are a single piece which is folded over, sewn, then turned out. This makes it very easy to get a nice rounded edge, plus it provides a self lining.

For the Thinsulate interlining I placed attached it directly to the lining, with the fleecy side facing the wrong side of the lining and the quilted side facing the wrong side of the corduroy. I never worked with Thinsulate before so it was a new experience for me. I didn’t need to baste it to the lining as the flannel provided plenty of “grip.” I did trim it down to 1/8″ seam allowances after sewing a seam. This stuff is pretty fragile with heat, so pressing the seams needed to be done lightly and carefully. (I accidentally melted a section of it.) It does have some loft but is lightweight and easy to sew through. I had no problem making the buttonholes, though I did use a buttonhole stabilizer plate simply due to wanting to eliminate error with the bulky fabric.

Ottobre instructions are quite minimal (basically the same as Burda’s used to be) so you should have some experience with sewing a coat before you attempt this pattern. The nice thing again about baby clothes is since they take so little fabric it isn’t a big deal if you need to recut and start over again! I haven’t sewed a lined jacket/coat in forever so I needed to think a bit about how to bag the lining, but I managed just fine. There’s no front facing so that makes things simpler.

Green Bean Baby Set

Photos

The pajamas, which are the A envelope style top with long sleeves and the snap footie Y bottom.

I’ve done my best to get photos of the pants, which are view V…it is not easy with someone who is trying to grab my camera and always moving…hence resorting to a post-lunch photo in the highchair.

Some action shots:

Pattern Background

The Green Bean Baby Set by Empty Hanger Patterns is sold on Etsy. It is a PDF sewing pattern that includes a basic onesie with cutting lines and instructions for all sorts of variations. Rather than nesting the sizes like most pattern companies, they have you print by size and nest the basic variations. Extra pattern pieces for things like cuffs, a hood, etc are printed off as necessary. Make sure you read the instructions as all the information you need on which pages to print is found there.

The pattern is marketed as the only baby clothes pattern you will ever need, and I feel that’s pretty accurate! It includes European sizes 50-98 (20”-38.5”) which roughly covers newborn through toddlerhood. I would say that at less than $10 this is by far the most cost effective pattern out there. It does cover your needs for basic knit fabric baby items, but if you want to do anything with wovens you will have to look elsewhere.

Size

This was tricky!

My son is 14 months now and on the smaller side. He has a sturdy but wiry build and wears mostly wears Carters RTW baby clothing (which I believe tends to be slimmer cut). Right now he wears 12 months, but while it fits in the width it is getting too short in the length. I mostly use knit pants on him because he wears cloth diapers and woven baby pants ten to be cut for much slimmer disposable diapers.

Per the pattern he was right between size 74 and 80. Since it’s always better to go bigger rather than smaller I chose size 80 for the first round. I made him footie pajamas with snaps at the legs. It was HUGE on him. Have to set it aside for later!

For the next round I decided to print off size 74. I compared the pattern to some current clothing he has and it seemed to be a much better fit for now.

Materials

For the pajamas I used a cotton interlock, with a cotton baby rib knit for the contrast (cuffs, neck, and one of the snap closure facings since I was short on the main fabric). Both were from Nature’s Fabrics.

I interfaced the leg band with Pro-Sheer Elegance from Fashion Sewing Supply. (Unfortunately she’s hit a difficult time in her personal life and my order placed over a month ago never shipped. It seems up in the air as to whether she’s going to continue the business or not.) I used these snaps from Amazon. They seemed to work ok, though I would have preferred to use the ones from Snap Source (another great sewing notion provider that’s no longer in business).

For the pants I used a recently purchased rayon/polyester sweatshirt fleece from Fabric Mart for the main fabric, and a cotton rib knit for the waistband and cuffs. I believe the rib knit is from Fabric Mart as well, but I purchased it so long ago I don’t really know! The rayon/poly sweatshirt fleece is SO soft and cozy and washed really well, so I ended up buying a bunch more for various future projects. It is hard to find inexpensive winter pants for babies, especially if they aren’t 100% polyester fleece.

The stretch was similar to stretch bengaline in that the stretch was greater lengthwise vs width, so I cut it with the grain perpendicular rather than parallel to the selvage.

Alterations

I didn’t make any alterations to the size 80 pajamas as I wanted to get a better sense of the fit before doing anything. As I mentioned before they ended up way too big.

For my size 74 pants, the sizing was much better. I will say that they were comparable to the 18 month Carters pants in length even though technically size 74 is closer to 12 months rather than 18 months. I did find the rise was too low, and lengthened it 1”. I also found the waistband was IMO way too wide for baby clothing – they assume the elastic width will be about 2”. I don’t have a lot of experience with baby clothing, but this seems so wide on such a tiny body. 1” wide elastic seems way more common. So I ended up removing 1” from the waistband and adding another 1” back to the rise. By the time I was done the rise for the pants pattern pieces was 2” higher than what the pattern was originally drafted for. I also added another 3/8” of height at the center back as I found that with the cloth diapers the back waistband of pants tends to dip downward on my son.

I had a really hard time measuring my son with any sort of accuracy (he wiggles SO MUCH now and tends to wake up if I try to measure him while he sleeps) but this pattern seems a bit longer in the legs than the RTW I’ve used. I will say that in my son’s case the cloth diaper throws off fit as the bulk tends to take up a lot of the rise in pants/pajamas. However when I was comparing pattern pieces it seemed like the leg length for size 74 was comparable to the length of the 18 months Carter pants, not the 12 months.

One issue I’ve consistently had with RTW baby clothes is in addition to the rise being too short, the waist is too big. While the pants mostly fit everywhere else. So the pants tend to sag and get pulled down while crawling. By making my own I could snug in the elastic, and patch in another piece if it is too small in the future.

Construction

This sewing pattern includes 3/8” seam allowances. IMO it doesn’t make sense for knits as a lot of us are going to be sewing this on a serger. With the pajamas I had already cut them out before I noticed the 3/8” seam allowances, so spent a lot of time trimming (and probably losing some accuracy along the way). For the pants I trimmed the allowances down to 1/4” before cutting, and it was overall a much quicker and pleasant sewing experience.

The instructions are great! There’s illustrations for every step, and even my severely sleep deprived brain could follow along effortlessly. (He has yet to sleep through the night. The entire first year was spent waking up every 2-3 hours. Best we ever got was a single six hour stretch.) I did find it a bit confusing at first when it came to pattern assembly as I’m used to sizes rather than the style variations being nested, but after thinking about it it finally clicked for me. One thing I really enjoyed was there was no trimming or overlapping, you just butt the paper edges together and tape.

Since the pants are cut from the sleeper/pj pattern block they don’t have a front or back crotch curve seam. Instead there’s a gusset at the back crotch seam to give more room and shape.

Conclusion

I would 100% recommend this pattern for basic baby clothes. I prefer Ottobre for wovens and more unique styles, but for your basic baby and toddler wardrobe this pattern works great. Once you figure out the alterations your baby needs you have a solid pattern block to work with as they grow. The instructions are easy to follow and the fact that it offers so many styles and sizes for less than $10 makes it an affordable choice as well.