Jalie 4451 “Claudette” Shirt

Pattern Background

Jalie 4451 is a long sleeve shirt with a back yoke, two back tucks, and standard sleeve placket. The cuffs and collar band are angled off instead of rounded at the corners. You can also make this in shirtdress length with a shaped hem and self fabric tie belt.

The pockets and flaps for the shirt are pointed shape. The shirtdress pockets and flaps are square shaped, with larger square patch pockets at hip level.

Fabric and Materials

I used a single napped cotton flannel recently purchased from Fabric Mart. Sometimes flannel thickens up a lot after washing/drying which can change the drape, but this maintained a very soft hand.

I used fusible knit interfacing for the front placket/pocket reinforcement/pocket flaps/sleeve placket. Not a huge fan of the plasticky feel of the backing, but it works for soft stabilization. For the collar, collar band, and cuffs I used a lightweight woven interfacing. I’m not sure but I think it was Pellon SF-101 Shape Flex.

The buttons are from WAWAK. I find they are the best value, you can get 144 for less than $7 and it’s not such a gamble on quality like buying from Amazon.

Size/Alterations

Based on my measurements I cut a size Y for the best/shoulders/sleeves, a W for the waist, and BB for the hips and hem length. From there I added 1” length to the sleeves. I probably only needed 1/2-3/4” extra length but I always go long with flannel because I feel like no matter how much you prewash/dry on hot, it still ends up slowly shrinking over time. I also added 3/4” width to the sleeves at the bicep and elbow, tapering to nothing at the cuff. I’m not sure the extra width was necessary but RTW shirt sleeves are usually too tight so I always err on the side of adding more room. It can always be trimmed off if necessary.

Construction

Cutting took me quite a lot in both time and extra fabric due to trying my best to pattern match the plaid.

When it comes to shirts I find there often a few different ways of accomplishing the same thing, so while I give the instructions a glance I often depend on instructions from a variety of resources.

For the collar and collar band pieces I trimmed all seam allowances down to 1/4”, with the exception of the seam where the collar band attaches to the shirt neck. I just find it’s easy to manage both seam allowance accuracy and bulk with 1/4” instead of 3/8” seam allowances.

I use the thread method for collars now. It involves some precision getting the thread and your needle in the right position but once you turn out the corner it comes out so much sharper than if you trim and then push it out like most sewing instructions have you do. I use this same method for cuffs and really anything else where you need to turn out a sharp corner.

I used Pam Erny’s tutorial for shirt sleeve plackets. Her tutorial is probably the best out there. Something about splitting the placket piece into two where the slit is instead and keeping the folded edge squared off instead of angled helps me get a more professional end result.

I sewed all the buttons on using my new button sewing foot. It certainly makes the process much quicker, but I prefer the function of a hand sewn button as you can add a shank when sewing to make things sit smoother, especially when it’s a thicker fabric like this.

Conclusion

I’m pretty happy with this shirt and plan on making the shirtdress length version in the future as well. I just wish Jalie included short sleeve length as well as full length sleeves with the pattern, since it seems like it would make such a nice summer dress.